Chassis Service Guide

Server System Features
Intel
®
Server Chassis H2000 Family Service Guide 5
Hot-Swap SAS/SATA Backplane
The Hot-Swap SAS/SATA backplane serves as an interface between the mother board and the
system drives. The following diagrams show the location for each connector found on
the backplane.
12 x 3.5-inch Hard Drive Backplane
A
SATA/SAS connectors for Node 1
B
SATA/SAS connectors for Node 2
C
SATA/SAS connectors for Node 3
D
SATA/SAS connectors for Node 4
Figure 10. 12 x 3.5-inch Hard Drive Basckplane Components (Front View)
A
20-pin Front Panel cable connector for Node 2, 4
B
2Blade Compute Node Power connector for Node 4
C
2x40 pin Bridge Board connector for Node 4
D
2x9 pin Power supply input connector
E
2x9 pin Power supply input connector
F
2x7 pin Power Control cable connector
G
2Blade Compute Node Power connector for Node 3
H
2x40 pin Bridge Board connector for Node 3
I
2x40 pin Bridge Board connector for Node 1
J
20-pin Front Panel cable connector for Node 1, 3
K
2Blade Compute Node Power connector for Node 1
L
2x9 pin Power supply input connector
M
2x9 pin Power supply input connector