Technical Product Specification

Intel
®
Server Board S2600WP TPS Intel
®
Light-Guided Diagnostics
8. Intel
®
Light-Guided Diagnostics
Intel
®
Server Board S2600WP has several onboard diagnostic LEDs to assist in troubleshooting
board-level issues. This section provides a description the location and function of each LED on
the server board.
8.1
Front Panel Support
The Intel
®
Server Board S2600WP supports Mini-FP on Intel
®
Server Chassis H2000WP. The
front panel control signals are provided through bridge board.
Each Mini-FP provides the below switch and LED features:
 Power switch with integrated power LED (green), includes clear button lens but painted
black with laser etched power icon for the light to shine through
 Chassis ID switch with integrated ID LED (blue), includes clear button lens but painted
black with laser etched ID icon for the light to shine through
 Recessed reset switch with black actuator
 Bi-color Status/Fault LED (green/amber). Includes a status/fault icon printed on cosmetic
front panel label. Icon should be translucent (only shows when LED is on).
 Single network activity/link LED, hardware baseboard ORs Ethernet and InfiniBand*
activity signals together into just one global signal. Includes a network activity/link icon
printed on cosmetic front panel label. Icon is translucent (only shows when LED is on).
8.1.1
System ID LED
The server board supports a blue system ID LED on the front panel, which is used to visually
identify a specific server installed among many other similar servers. There are two options
available for illuminating the System ID LED.
1. The front panel ID LED Button is pushed, which causes the LED to illuminate to a solid
on state until the button is pushed again.
2. An IPMI Chassis Identify command is remotely entered, which causes the LED to blink.
The System ID LED on the server board is tied directly to the System ID LED on system front
panel if present.
8.1.2
System Status LED
The server board supports status LED on the front panel, which acts as same as the status LED
on the server board.
8.1.3
Network Link/Activity LED
The server board provides LED on the front panel for Network Link/Activity. On S2600WP base
SKU, this LED shows the status of Ethernet port. On S2600WPQ and S2600WPF, this LED still
shows the Ethernet port link and activities. Below table shows the LED detail.
Revision 1.6 Intel order number G44057-007
163