Technical Product Specification

Intel® Server Board S2600WP TPS BIOS Setup Interface
Setup Item
Options
Help Text
Comments
Set User
Password
Entry Field – 0-14
characters
User password is used if Power On
Password is enabled and to allow
restricted access to BIOS Setup.
Length is 1-14 characters. Case
sensitive alphabetic, numeric and
special characters !@#$%^&*()-
_+=? are allowed.
Note: Removing the administrator
password also removes the user
password.
The User password is available only
if the Administrator Password has
been installed. This option protects
Setup settings as well as boot
choices. The User Password only
allows limited access to the Setup
options, and no choice of boot
devices.
When Power On Password
protection is enabled, the User
password may be used to allow the
BIOS to complete POST and boot
the system.
Power ON
Password
Enabled
Disabled
Enable Power On Password
support. If enabled, password entry
is required in order to boot the
system.
When Power On Password security
is enabled, the system will halt soon
after power on and the BIOS will ask
for a password before continuing
POST and booting. Either the
Administrator or User password may
be used.
If an Administrator password has
not been set, this option will be
grayed out and unavailable. If this
option is enabled and the
Administrator password is removed,
that will also disable this option.
Front Panel
Lockout
Enabled
Disabled
If enabled, locks the power button
OFF function and the reset and NMI
Diagnostic Interrupt buttons on the
system’s front panel. If Enabled is
selected, power off and reset must
be controlled via a system
management interface, and the NMI
Diagnostic Interrupt is not available.
Revision 1.6 Intel order number G44057-007 115