Technical Product Specification

BIOS Setup Interface Intel® Server Board S2600WP TPS
5.4.2.16
USB Configuration
The USB Configuration screen allows the user to configure the USB controller options.
To access this screen from the Main screen, select Advanced > USB Configuration. To move
to another screen, press the <Esc> key to return to the Advanced screen, then select the
desired screen.
Advanced
USB Configuration
Detected USB Devices
<Total USB Devices in System>
USB Controller
Enabled/Disabled
Legacy USB Support
Enabled/Disabled/Auto
Port 60/64 Emulation
Enabled/Disabled
Make USB Devices Non-Bootable
Enabled/Disabled
USB Mass Storage Device Configuration
Device Reset timeout
10 seconds/20 seconds/30 seconds/40 seconds
Mass Storage Devices:
Generic USB SD Reader 1.00 Auto/Floppy/Forced FDD/Hard Disk/CD-ROM
Figure 39. USB Configuration Screen
Table 44. Setup Utility – USB Controller Configuration Screen Fields
Setup Item
Options
Help Text
Comments
Detected USB
Devices
Information only. Displays the total
number of USB devices of all types
that have been detected in POST.
USB Controller
Enabled
Disabled
[Enabled] – All onboard USB
controllers are turned on and
accessible by the OS.
[Disabled] – All onboard USB
controllers are turned off and
inaccessible by the OS.
When the USB controllers are
Disabled, there is no USB IO
available for either POST or the OS.
In this case, all following fields on
this screen are grayed out and
inactive.
Legacy USB
Support
Enabled
Disabled
Auto
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. Disable option will only
keep USB Keyboard devices
available for EFI applications.
When Legacy USB Support is
Disabled, USB devices are available
only through OS drivers. If the USB
controller setting is Disabled, this
field is grayed out and inactive.
Intel order number G44057-007 Revision 1.6
110