Technical Product Specification

Intel®

Server Board S2600WP TPS BIOS Setup Interface

5.4.2.8

Mass Storage Controller Configuration

The Mass Storage Configuration screen allows the user to configure the Mass Storage

controllers that are integrated into the server board on which the BIOS is executing. This

includes only onboard Mass Storage controllers. Mass Storage controllers on add-in cards are

not included in this screen, nor are other storage mechanisms such as USB-attached storage

devices or Network Attached Storage.

There are two types of onboard controller configured in this screen, the AHCI SATA controller

and the Storage Control Unit (SCU) with SATA or SAS drive support and RAID support. There

are also informational displays of AHCI and SCU controller configuration, and SATA Drive

Information when applicable. If the presence of an Intel

Storage Module is detected, the type of

Storage Module is displayed as information-only.

To access this screen from the Main screen, select Advanced > Mass Storage Controller

Configuration. To move to another screen, press the <Esc> key to return to the Advanced

screen, then select the desired screen.

Advanced

Mass Storage Controller Configuration

AHCI Controller Configuration <AHCI Port Configuration>

SATA/SAS Controller Configuration <SCU SAS/SATA Port Configuration>

AHCI Capable SATA Controller Disabled/Compatibility/Enhanced/

AHCI

/RAID Mode

AHCI HDD Staggered Spin-Up Enabled/

Disabled

SAS/SATA Capable Controller Disabled / INTEL(R) ESRT2 (LSI*) /

INTEL(R) RSTe

Intel(R) Storage Module

- None / <Name of storage module detected >

PCI Express Gen3

Enabled

/Disabled

SATA Port 0