Technical Product Specification

Intel
®
Server System H2000WP FamilyTPS PCI Express* Riser Card and Assembly
Riser slot 2 on baseboard provides standard PCI Express* x16 Gen3 signals, together with
specific power pins to support high-power Graphic/GPGPU add-in card.
Note: Riser Slot 2 on baseboard only supports Intel
®
1U/2U Risers. It will cause damage to any
PCI-E based add-in card, which is directly plugged into the Riser Slot 2.
The PCI-E slot on Riser is x16 mechanically with x8 electrically. The IOM carrier is using PCI-E
x8 card edge with PCI-E x4 IO module slot.
Figure 44. PCI Express* Riser with bracket for Riser Slot 2
Figure 45. IOM Carrier
The 1GbE port is dedicated NIC port for RMM4 Lite module. It only works once the RMM4 Lite
module is installed in the system. The LED of dedicated NIC port is following the
below definition:
Table 71. Dedicated NIC Port LED Functionality
LED
Color
Condition
Functionality
Dedicated NIC Speed
Green
On
1Gbps mode
Amber
On
100Mbps mode
Off
10Mbps mode
Intel order number: G52418-006 Revision 1.6
80