Technical Product Specification

System Boards in the Node Tray Intel
®
Server System H2000WP Family TPS
Pin
Signal Description
2
SATA0_TXP
3
SATA0_TXN
4
GND
5
SATA0_RXN
6
SATA0_RXP
7
P5V_SATA/GND
Table 44. USB 2.0 Type-A Connector Pinout
Pin
Signal Description
1
P5V_USB
2
USB2_P0N
3
USB2_P0P
4
GND
Table 45. 5V_AUX Power Connector Pinout
Pin
Signal Description
1
GND
2
P5V
5.3 6Gbs SAS Support Option 1
This bridge board is designed support 6Gbs SAS signal from internal SAS RAID card or SAS
ROC. This bridge board will not connect to SCU ports from baseboard but make all other power
and control signals available to backplane. It will ship together with a dedicated SAS cable as a
spare of the system.
5.3.1 Overview of Bridge Board
The Bridge Board is a spare board across all baseboards going into the H2000WP serials
server chassis, to upgrade the system for 6Gbs SAS support. The Bridge Board provides hot
swap interconnect of all electrical signals to the backplane of the server chassis (except for
main 12V power). It supports up to 4x lanes of SAS/SATA and one mini SAS connector for
cable connection to PCIe based RAID card or SAS ROC. One Bridge Board is used per one
compute node. The Bridge Board is secured with several loose screws to the compute
node tray.
A dedicated mini SAS cable is shipped together with the bridge board, which is mechanically
fitted into the node tray.
Intel order number: G52418-006 Revision 1.6
46