Technical Product Specification

Product Overview Intel
®
Server System H2000WP Family TPS
2.6 Front Bezel Support
Intel
®
Server System H2000WP family provides front panel bezel. The bezel provides protection
to system HDD bays with a lock to chassis. The front view of the bezel is shown as below.
Figure 10. System Bezel Front View
2.7 Rack and Cabinet Mounting Options
The chassis was designed to support 19 inches wide by up to 30 inches deep server cabinets.
The system bundles with the following Intel
®
rack mount option.
A basic slide rail kit (Product order code – AXXELVRAIL) is designed to mount the chassis into
a standard (19 inches by up to 30 inches deep) EIA-310D compatible server cabinet.
CAUTION: THE MAXIMUM RECOMMENDED SERVER WEIGHT FOR THE RACK RAILS
CAN BE FOUND at http://www.intel.com/support/motherboards/server/sb/CS-033655.htm
.
EXCEEDING THE MAXIMUM RECOMMENDED WEIGHT OR MISALIGNMENT OF THE
SERVER MAY RESULT IN FAILURE OF THE RACK RAILS HOLDING THE SERVER.
Use of a mechanical assist to install and align server into the rack rails is recommended.
Intel order number: G52418-006 Revision 1.6
16