Technical Product Specification

Intel
®
Server System H2000WP Family TPS Product Overview
2. Product Overview
The Intel
®
Server System H2000WP family includes two major SKUs: H2312WP and H2216WP,
which are rack mount 2U 4-node server systems, purpose-built for high-density and lowest total
cost of ownership in dense computing applications, such as HPC and IPDC. The system is
integrated with four units of Intel
®
Server Board S2600WP or S2600WPQ/S2600WPF, supports
up to twelve 3.5" or sixteen 2.5" hot-swap SAS or SATA hard drives, with Common Redundant
Power Supply (CRPS) capability.
This chapter provides a high-level overview of the system features. The following chapters
provide greater detail for each major system component or feature.
Table 1. System Feature Set
Feature
Description
Processor
Support Intel
®
Xeon
®
Processor E5-2600 and E5-2600 v2 series processors.
 Up to 8 GT/s Intel
®
QuickPath Interconnect (Intel
®
QPI).
 LGA 2011 Socket R.
 Thermal Design Power (TDP) up to 135W with conditional ambient temperature, 130 Watt
(6-core or 8-core) and below, or 80 Watt (4-core) and below.
Memory

Unbuffered DDR3 and registered DDR3 with ECC DIMMs.
 Memory DDR3 data transfer rates of 800/1066/1333/1600 MT/s.
 Load Reduced DDR3 DIMM.
 DDR3 standard I/O voltage of 1.5V (all speed) and DDR3 Low Voltage of 1.35V
(1333MT/s or below)
Chipset
Intel
®
C600-A Platform Controller Hub (PCH) with support for optional Storage Upgrade Key
System
Connectors
/Headers
External I/O connectors:
 DB-15 Video connectors.
 Two RJ-45 Network Interface for 10/100/1000 LAN.
 One stacked two port USB 2.0 (Port 0/1) connectors.
 One dedicated 1GbE management port on rIOM carrier (Optional).
 One InfiniBand* QDR QSFP port (Board SKU: S2600WPQ) or One InfiniBand* FDR QSFP
port (Board SKU: S2600WPF)
Internal connectors/headers:
 Bridge Slot to extend board I/O
- SCU0 (Four SAS 3Gb/s ports)
to backplane
- Front control panel signals
- One SATA (Port 0) 6Gb/s port for DOM
 Bridge Slot to extend board I/O with spare bridge board
- Mini SAS port (Four SAS 6Gb/s ports) from add-in RAID card to backplane
- Front control panel signals
 One Type-A USB 2.0 connector (USB port 2)
 One 2x7pin header for system FAN module
 One DH-10 serial Port A connector
 One SATA 6Gb/s (Port 1)
 One 2x4 pin header for Intel
®
RMM4 Lite
 One 1x4 pin header for Storage Upgrade Key
System Fan
Support
Three sets of dual rotor fan for each node.
Add-in Adapter
Support
Four PCIe Gen III x16 riser slots:
 Riser slot 1 support PCIe Gen III x16 Riser with LP PCIe add-in card
 Riser slot 2 supports PCIe Gen III x8 Riser (Intel
®
rIOM)
 Riser slot 3 and slot 4 cannot be used with bridge board covered
One Bridge Slot for board I/O expansion.
Revision 1.6 Intel order number: G52418-006 3