User Guide

36 Intel
®
System Configuration Utility – User Guide
Example:
syscfg /pefc enable alert+pdown+reset+pcycle
4.4.13 PEF Filter (/peff)
syscfg {{/peff | /peffilter} Filter_table_index {enable | disable} {none | alert | pdown |
reset | pcycle | diagint} {1..15}}
Filter_table_index
Index into the PEF filter table for a particular
filter.
enable | disable
Enable specified filter.
none | alert | pdown | reset | pcycle
PEF Action. Enable multiple actions by using
a plus sign to concatenate the values. none
may not be combined with other options.
pdown means “power down.” pcycle means
“power cycle.”
1..15
Policy number. This number maps to the
Alert Policy Table. (See also /pefp option.)
Configures the Platform Event Filters used by the BMC on the specified channel. See IPMI
2.0 Specification, Chapter 17, for more information on Platform Event Filtering.
Example:
syscfg /peff 3 enable pdown 1 /peff 4 enable pdown 1
4.4.14 PEF Policy (/pefp)
syscfg {/pefp | /pefpolicy} Policy_table_index {enable | disable} {1..15} {ALWAYS |
NEXT_E | STOP | NEXT_C | NEXT_T} Channel_ID Destination_table_index
Policy_table_index
Policy Table Index
enable | disable
Enable policy
1..15
Policy number
ALWAYS | NEXT_E | STOP | NEXT_C |
NEXT_T
Alert Policy:
ALWAYS = always send an alert to the
destination indicated in the policy table entry
specified by argument 1.
NEXT_E = if an alert was successfully sent to
the previous destination attempted, then do
not send an alert to the destination indicated
in the policy table entry specified in
argument 1, but go to the next policy table
entry with the same policy number instead.
STOP=if an alert was successfully sent to the