Technical Product Specification

Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
Intel® Server System P4000IP and Intel® Workstation System Overview
20 Intel order number G38159-002 Revision 1.2
1.5 Hot swap Hard Drivers and Front Panel Options
Figure 13. Hot-Swap Hard Disk Drive Cage
1.6 Chassis Security
A variety of chassis security options are provided at the system level:
 A removable padlock loop at the rear of the system access cover can be used to prevent
access to the microprocessors, memory, and add-in cards. A variety of lock sizes can be
accommodated by the 0.270-inch diameter loop.
 A Kensington* cable lock mounting hole is provided on the rear chassis I/O panel.
 A chassis intrusion switch is provided, allowing server management software to detect
unauthorized access to the system side cover.
 In hot-swap hard drives configuration, a door lock is provided on the front bezel assembly
with the door to prevent access to the hot-swap hard drives and the interior of the chassis.
Note: See the technical product specificationappropriate to the server board and System
Service Guide for a description of BIOS and management security features for each specific
supported platform. Technical product specifications can be found at
http://www.intel.com/support.
1.7 Front Bezel Features
There are two type of front bezel assembly.