Service Guide

Hardware Installations and Upgrades
76 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
Installing and Removing the Intel
®
I/O Expansion
Module
Installing the Intel
®
I/O Expansion Module
Note: An Intel® I/O Expansion Module Kit (order code: AXXIOMKIT, MM# 920852) needs
to be ordered prior to the installation of the Intel® I/O Expansion Kit.
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Remove the chassis I/O Module slot filler. (see letter A).
5. Attach cable to the Intel® I/O Expansion Module (see letter B).
6. Attache and fix the Intel® I/O Expansion Module to the AXXMIKIT bracket with screws. (see letter
C, D).
7. Connect the Intel® I/O Expansion Module cable to the board I/O module connector.
Figure 102. Installing the Intel
®
I/O Expansion Module
Removing the Intel
®
I/O Expansion Module
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Remove the screws. (see letter A).