Service Guide

Hardware Installations and Upgrades
72 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
9. Close the PCI add-in board retention device.
Figure 95. Close the PCI add-in board retention device
10. Rotate the PCI card retainer until the PCI card retainter is secured by the chassis. Make sure the PCI
card is secured into the slot under the PCI card retainter.
Figure 96. Rotate the PCI card retainer
11. Attach cables if necessary.
12. Install the air duct if it is removed. For instructions, see the Quick Start User’s Guide or Service Guide
provided with your Intel
®
server/workstation board.
13. Install the chassis cover. For instructions, see “Installing the Chassis Cover”.
14. Plug all peripheral devices and the AC power cable into the server.
15. Power up the server.