Service Guide

Hardware Installations and Upgrades
58 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
6. Lift the EMI shield (see letter A) and move EMI shield outward from the chassis (see letter B).
Figure 72. Removing the Hot-swap HDD EMI Shield
Installing the Hot-swap HDD EMI Shield
1. Fit the edges of the EMI Shield against the sides of the chassis (see letter A).
2. While pressing the EMI Shield, slide the EMI Shield downwards until the latches on the EMI Shield
are engaged with the chassis (see letter B).
Figure 73. Installing the Hot-swap HDD EMI Shield