Service Guide

Hardware Installations and Upgrades

52 Intel

Server System P4000IP and Intel

Workstation System P4000CR Service Guide

7. Make the backplane and server board/RAID controller card cable connections. Refer to the

documentation that came with your server board and/or RAID controller card for instructions on

connecting backplane cables to your server board or RAID controller card.

i. Connect an I

C cable (see letter A).

ii. Connect Mini SAS data cables (seeletter B).

iii. Connect power cable (seeletter C).

Figure 66. 8x3.5” Hot Swap Backplane Cable Connections

8. Install the front bezel. For instructions, see “Installing the Front Bezel (Pedestal Only)”.

9. Install the air duct if the air duct is removed. For instructions, see the Quick Start User’s Guide or

Service Guide provided with your Intel

server/workstation board.

10. Install the chassis cover. For instructions, see “Installing the Chassis Cover”.

11. Plug all peripheral devices and the AC power cable into the server.

12. Power up the server.