Service Guide

Hardware Installations and Upgrades
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 43
5. Press the clip (see letter A) and lift the EMI shield (see letter B) and move the EMI shield outward
from the chassis.
Figure 54. Removing the Fixed HDD EMI Shield
Installing the Fixed HDD EMI Shield
1. Fit the edges of the EMI Shield against the sides of the chassis (see letter A).
2. While pressing the clip (see letter B), slide the EMI Shield downwards until the latches on the EMI
Shield are engaged with the chassis (see letter C).