Service Guide

Hardware Installations and Upgrades
40 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
Installing the Hot-swap Fan
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Insert hot-swap fan into corresponding chassis slot until it clicks into place.
Figure 49. Installing Hot-swap Fan
Installing and Removing a DVD or CD-ROM Drive
Installing a DVD or CD-ROM Drive
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Remove the front bezel if it is installed. For instructions, see “Removing the Front Bezel”.
5. Remove an EMI shield (see letter A).
Figure 50. Removing EMI Shield