Service Guide

BIOS Setup Utilities
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 203
Option Values: Enabled
Disabled
Help Text:
[Disabled] - Devices removed from the system are deleted from Boot Order Tables.
[Enabled] - Devices removed have positions in Boot Order Tables retained for later
reinsertion.
Comments: When the option changes to “Enabled” from “Disabled”, it will enable
Static Boot Order (SBO) from the next boot onward, and also the current Boot Order will be
stored as the SBO template.
When the option changes from “Enabled” to “Disabled”, this will disable SBO and the SBO
template will be cleared.
Otherwise it will retain the current Enabled/Disabled state.
17. Reset Static Boot Order
Option Values: Yes
No Action
Help Text:
[Yes] Take snapshot of current boot order to save as Static Boot Order Template.
Comments: This option will allow you to save the Boot Order list as the Static Boot
Order template without disabling and re-enabling the Static Boot Order option.
Select Yes to snapshot the current Boot Options list into the Static Boot Options list on the next
boot. After saving Static Boot Options list, this option will change back to NoAction
automatically.
This option is available only when the Static Boot Order option is Enabled. Otherwise it will
grayed out and unavailable.
CDROM Order
The CDROM Order screen allows the user to control the order in which BIOS attempts to boot
from the CDROM drives installed in the system. This screen is only available when there is at least
one CDROM device available in the system configuration.
/
NOTE
A USB attached CDROM device will appear in this section. However, a USB Key formatted as a
CRDOM device will not – it will be detected as a Hard Disk device and will be included in the Hard
Disk Order Screen.