Service Guide

BIOS Setup Utilities
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 193
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
14. Gateway IP
Option Values: [Entry Field 0.0.0.0, 0.0.0.0 is default]
Help Text:
View/Edit Gateway IP. Press <Enter> to edit.
Comments: This specifies the IPv4 addressing Gateway IP for the Intel
®
RMM4
DMN LAN. There is a separate IPv4 Gateway IP field for the Baseboard LAN configuration.
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
15. IPv6 Source
Option Values: Static
Dynamic
Auto
Help Text:
Select Intel
®
RMM4 IPv6 source: If [Static], IPv6 parameters may be edited. If
[Dynamic], these fields are display-only and IPv6 address is acquired automatically
(DHCP). If [Auto], these fields are display-only and IPv6 address is acquired using
ICMPv6 router / neighbor discovery.
Comments: This specifies the IP Source for IPv6 addressing for the Intel
®
RMM4
DMN LAN configuration. There is a separate IPv6 Source field for the Baseboard LAN
configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is Enabled, the initial value for this field is acquired from the BMC, and
its setting determines whether the other Intel
®
RMM4 DMN LAN IPv6 addressing fields are
display-only (when Dynamic or Auto) or can be edited (when Static).
16. IPv6 Address