Service Guide

BIOS Setup Utilities
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 191
Option Values: [Entry Field 0000.0000.0000.0000.0000.0000.0000.0000,
0000.0000.0000.0000.0000.0000.0000.0000 is default]
Help Text:
View/Edit Gateway IPv6 address. Press <Enter> to edit. Gateway IPv6 addresses consist
of 8 hexadecimal 4 digit numbers separated by colons.
Comments: This specifies the Gateway IPv6 Address for the Baseboard LAN. There
is a separate Gateway IPv6 Address field for the Intel
®
RMM4 LAN configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IPv6 Source determines whether this field is display-only (when Dynamic or Auto) or
can be edited (when Static).
9. IPv6 Prefix Length
Option Values: [Entry Field 0 – 128, 64 is default]
Help Text:
View/Edit IPv6 Prefix Length from zero to 128 (default 64). Press <Enter> to edit.
Comments: This specifies the IPv6 Prefix Length for the Baseboard LAN. There is a
separate IPv6 Prefix Length field for the Intel
®
RMM4 LAN configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IPv6 Source determines whether this field is display-only (when Dynamic or Auto) or
can be edited (when Static).
10. Intel
®
RMM4
Option Values: Not Present
Intel
®
RMM4-Lite
Intel
®
RMM4 + DMN
Help Text: <None>
Comments: Information only. Displays whether an Intel
®
RMM4 component is
currently installed. This information may come from querying the BMC.
Intel
®
RMM4-Lite is the Management Module without the Dedicated Server Management NIC
Module. When this is present, or if the Management Module is Not Present at all, the fields for
Intel
®
RMM4 LAN Configuration will not be visible.
When an Intel
®
RMM4 + DMN is installed, the options for Intel
®
RMM4 LAN Configuration
will be visible. When IPv6 is Disabled, the IPv4 configuration fields will be visible and the IPv6
configuration fields will not be visible. When IPv6 is Enabled, the IPv4 fields will be grayed out
and inactive, while the IPv6 Configuration fields will be visible.