Service Guide

BIOS Setup Utilities
190 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
When this option is set to Disabled, all other IPv6 fields will not be visible for the Baseboard
LAN and Intel
®
RMM4 DMN (if installed). When IPv6 addressing is Enabled, all IPv6 fields for
the Baseboard LAN and Intel
®
RMM4 DMN will become visible, and all IPv4 fields will be
grayed out and inactive.
6. IPv6 Source
Option Values: Static
Dynamic
Auto
Help Text:
Select BMC IPv6 source: If [Static], IPv6 parameters may be edited. If [Dynamic], these
fields are display-only and IPv6 address is acquired automatically (DHCP). If [Auto],
these fields are display-only and IPv6 address is acquired using ICMPv6 router /
neighbor discovery.
Comments: This specifies the IP Source for IPv6 addressing for the Baseboard LAN
configuration. There is a separate IPv6 Source field for the Intel
®
RMM4 LAN configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is Enabled, the initial value for this field is acquired from the BMC, and
its setting determines whether the other Baseboard LAN IPv6 addressing fields are display-only
(when Dynamic or Auto) or can be edited (when Static).
7. IPv6 Address
Option Values: [Entry Field 0000.0000.0000.0000.0000.0000.0000.0000,
0000.0000.0000.0000.0000.0000.0000.0000 is default]
Help Text:
View/Edit IPv6 address. Press <Enter> to edit. IPv6 addresses consist of 8 hexadecimal
4 digit numbers separated by colons.
Comments: This specifies the IPv6 Address for the Baseboard LAN. There is a
separate IPv6 Address field for the Intel
®
RMM4 LAN configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IPv6 Source determines whether this field is display-only (when Dynamic or Auto) or
can be edited (when Static).
8. Gateway IPv6