Service Guide

BIOS Setup Utilities
142 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
Help Text: <None>
Comments: Information only. If no Intel
®
Storage Module is detected, then
None
is
displayed. This shows the customer the product name of the module installed, which helps in
identifying drivers, support, documentation, and so on.
10. SATA Port
(For Port numbers 0-6)
Option Values:
Not Installed
<Drive Information>
Help Text: <None>
Comments: Information only. The Drive Information, when present, will typically
consist of the drive model identification and size for the disk drive installed on a particular
port.
This Drive Information line is repeated for all 6 SATA Port for the onboard AHCI capable
SATA Controller. However, for any given board, only the ports which are physically
populated on the board are shown. That is, a board which only implements the two 6 GB/s
ports 0 and 1 will only show those two ports in this Drive Information list.
This section for Drive Information does not appear at all when the SCU is set to Disabled or
the SATA operational mode is RAID Mode, nor for any drives attached to the SCU SATA or
SAS ports. In these cases the BBS information is not available to display.
PCI Configuration
The PCI Configuration screen allows the user to configure the PCI memory space used for onboard
and add-in adapters, configure video options, and configure onboard adapter options.
It also includes a selection option to go to the NIC Configuration screen.
To access this screen from the Main screen, select Advanced > PCI Configuration. To move to
another screen, press the <Esc> key to return to the Advanced screen, then select the desired screen.