Service Guide

BIOS Setup Utilities
132 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
Comments: Information only: Displays the status of each DIMM socket present on
the board. There is one line for each DIMM socket present on the board.
For each DIMM socket, the DIMM Status reflects one of the following three possible states:

Installed&Operational
– There is a DDR3 DIMM installed and operational in this
slot.

Not Installed
– There is no DDR3 DIMM installed in this slot.

Failed/Disabled
– The DIMM installed in this slot has failed during
initialization and/or was disabled during initialization.
For each DIMM that is in the
Installed&Operational
state, the DIMM Size in GB of that DIMM is
displayed. This is the physical size of the DIMM, regardless of how it is counted in the
Effective Memory size.
Note
: In “DIMM_XY”, X denotes the Channel Identifier A - P, and Y denotes the DIMM Slot
identifier 1 - 3 within the Channel. DIMM_A2 is the DIMM socket on Channel A, Slot 2. Not all
boards have the same number of channels and slots – this is dependent on the board
features.
S2600 boards
can have DIMMs A1, A2, A3 to H1, H2, H3 (max 2 CPU/4 chan/3 DPC)
Memory RAS and Performance Configuration
The Memory RAS and Performance Configuration screen allows the user to customize several
memory configuration options, such as whether to use Memory Mirroring or Memory Sparing.
To access this screen from the Main screen, select Advanced > Memory Configuration > Memory
RAS and Performance Configuration. To move to another screen, press the <Esc> key to return to
the Memory Configuration screen, if necessary press the <Esc> key again to return to the
Advanced screen, then select the desired screen.