Service Guide

Hardware Installations and Upgrades
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 99
7. Remove the expander card from expander card bracket by releasing the securing screws.
Figure 139. Removing the Expander card
8. Install the Fixed HDDs or Hot swap drive cages. For instructions, see “Install Fixed Hard Drives”, or
“Install 8x3.5’’ Hot swap Drive Cage Assemble”, or “Install 8x2.5’’ Hot swap Drive Cage Assemble”.
9. Install the fans. For instructions, see “Install the Fixed Fan” or “Install the Hot-swap Fans”.
10. Install the chassis cover. For instructions, see “Install the Chassis Cover”.
Connecting and Disconnecting Cables to or from
Server Workstation Board
CAUTION
Use caution when routing cables to ensure that cables do not obstruct fan airflow.
1. See your Intel
®
Server/Workstation Board Service Guide or Quick Start User’s Guide for cable
connection locations.
2. If your server has a hot swap power supply, secure the cables (that route toward the
server/workstation board) to the chassis.
Connecting Cables to Server/Workstation Board
1. If your server has a hot swap power supply, connect the cables (that route toward the
server/workstation board) to the chassis.
2. See your Intel
®
Server/Workstation Board Service Guide or Quick Start User’s Guide for cable
connection locations.