Quick Installation Guide Part 2

12
General Installation Process
11
Install RMM4 EMI Cover
(optional)
A
Install the RMM4 EMI cover with thumb screws.
Server
Board
A
10
Install Intel® Remote Management Module 4 NIC (optional)
Top View
A
A
Attach the metal fastening bracket to Intel
®
Dedicated Server
Management NIC module and secure the bracket with two screws.
B
Remove the alternate RMM4 knock out by pressing the knock out
from inside the chassis.
C
Connect the cable to the cable connector on the Intel
®
Dedicated Server
Management NIC module.
D
Mount the NIC module to the rear panel of the chassis and secure the
bracket with two screws.
E
Connect the cable to the RMM4 NIC connector to the RMM4 NIC connector
on your server board.
Server
Board
RMM4
NIC Connector
Server
Board
C
E
Chassis
Back
Opening
Filler
D
B
CAUTION: Carefully remove the knock out with
screwdriver, directly removing it with finger has
potential risk.
CAUTION: Care should be used when attaching or removing this cable.
Mishandling the cable could cause damage.
12
Install Alternate Serial Port (optional)
A
Remove the alternate serial port knockout by pressing the
knockout from inside the chassis.
B
Mount the serial port on the rear panel of the chassis.
C
Secure the port with two screws.
D
Connect the cable to the Serial B Connector on your server board.
CAUTION: Carefully remove the knock out with screwdriver,
directly removing it with finger has potential risk.
CAUTION: Care should be used when attaching or removing
this cable. Mishandling the cable could cause damage.
Server
Board
Serial B
Connector
B
D
Filler
Chassis
Back
Opening
A
C