User Guide

56 Intel
®
System Configuration Utility – User Guide
Port 60/64 Emulation=1 ;Options: 0=Disabled:
1=Enabled
Make USB Devices Non-Bootable=0 ;Options: 0=Disabled:
1=Enabled
Device Reset timeout=1 ;Options: 0=10 sec: 1=20
sec: 2=30 sec: 3=40 sec
HP v190w 3000=0 ;Options: 0=Auto: 4=CD-ROM:
1=Floppy: 2=Forced FDD: 3=Hard Disk
[BIOS::System Acoustic and Performance Configuration]
Set Throttling Mode=0 ;Options: 0=Auto: 6=DCLTT:
2=OLTT: 3=SCLTT
Altitude=900 ;Options: 300=300m or less:
900=301m - 900m: 1500=901m - 1500m: 3000=Higher than 1500m
Set Fan Profile=1 ;Options: 2=Acoustic:
1=Performance
Fan PWM Offset=0 ;Options: 100=Max: 0=Min:
0=Step
[BIOS::Serial Port Console Redirection]
Console Redirection[2]=1 ;Options: 0=Disabled:
1=Enabled
Console Redirection[4]=0 ;Options: 0=Disabled:
1=Enabled
Out-of-Band Mgmt Port=1 ;Options: 1=COM0: 2=COM1:
3=COM2 (Disabled): 4=COM3 (Disabled)
[BIOS::Security]
Front Panel Lockout=0 ;Options: 0=Disabled:
1=Enabled
[BIOS::Server Management]
Assert NMI on SERR=1 ;Options: 0=Disabled:
1=Enabled
Assert NMI on PERR=1 ;Options: 0=Disabled:
1=Enabled
Reset on CATERR=1 ;Options: 0=Disabled:
1=Enabled
Reset on ERR2=1 ;Options: 0=Disabled:
1=Enabled
Resume on AC Power Loss=2 ;Options: 1=Last State:
2=Power On: 0=Stay Off
Clear System Event Log=0 ;Options: 0=Disabled:
1=Enabled
FRB-2 Enable=1 ;Options: 0=Disabled:
1=Enabled
OS Boot Watchdog Timer=0 ;Options: 0=Disabled:
1=Enabled
Plug & Play BMC Detection=0 ;Options: 0=Disabled: