User Guide

50 Intel
®
System Configuration Utility – User Guide
Disable
PerMessageAuthentication=ENABLE ; Options: Enable,
Disable
UserLevelAuthentication=ENABLE ; Options: Enable,
Disable
AccessMode=ALWAYS ; Options:Disable,
Always, shared
PrivilegeLevelLimit=ADMIN ; Options: User,
Operator, Admin
CommunityString=public ; Upto 16 bytes, no
space allowed
ARPEnable=DISABLE ; Options: Enable,
Disable
ARPResponse=ENABLE ; Options: Enable,
Disable
ARPInterval=0 ; Decimal value between
0 & 255. This values is in milliseconds. Input value rounded down to the
nearest 500ms value
DHCPEnable=DISABLE ; Options: Enable or
Disable. If 'Disable' static IP will be used
HostIP=0.0.0.0 ; This field should not
be edited
SubnetMask=0.0.0.0 ; This field should not
be edited
GatewayIP=0.0.0.0 ; This field should not
be edited
GatewayMAC=00-00-00-00-00-00 ; This field should not
be edited
BackupGatewayIP=0.0.0.0 ; This field should not
be edited
BackupGatewayMAC=00-00-00-00-00-00 ; This field should not
be edited
IPV6Status=DISABLE ; Options: Enable or
Disable
AlertIP0=0.0.0.0 ; In xxx.xxx.xxx.xxx
form
AlertMAC0=00-00-00-00-00-00 ; In xx-xx-xx-xx-xx-xx
form
AlertIP1=0.0.0.0 ; In xxx.xxx.xxx.xxx
form
AlertMAC1=00-00-00-00-00-00 ; In xx-xx-xx-xx-xx-xx
form
[CHANNEL::LAN3]
AlertEnable=ENABLE ; Options: Enable,
Disable
PerMessageAuthentication=ENABLE ; Options: Enable,
Disable
UserLevelAuthentication=ENABLE ; Options: Enable,
Disable