Spares, parts list, and configuration guide

13
P4308XXMFDR
916333
00735858244633
5032037039208
1
A general purpose pedestal chassis targeted at small to medium
business supporting CEB and EEB form factor server boards with
3.5" Fixed HDDs, 460W Cold-Redundant Power Supplies and non-
Redundant Cooling
Includes: 8x 3.5" Fixed Drive Carriers, 2x 460W Common
Redundant Power Supply (Platinum Efficiency), 2x 120mm fixed
fans, two 150mm SATA power cables with one 4-pin ATX power
header and 2 vertical SATA power headers, four 600mm SATA
cables , each cable has one vertical SATA header and one right
angle SATA header.
Note: This chassis is compatible with multiple server board skus.
As such the specific airduct and cables for that server board needs
to be ordered seperately. This chassis does not have any airduct.
AUPMGPURBR (920613) needs to be ordered to support add-in
GPGPU cards.
P4308XXMFDN
916334
00735858244640
5032037039215
1
A general purpose pedestal chassis targeted at small to medium
business supporting CEB and EEB form factor server boards with
3.5" Fixed HDDs, single 460W Cold-Redundant Power Supplies
and non-Redundant Cooling
Includes: 8x 3.5" Fixed Drive Carriers, 1x 460W Common
Redundant Power Supply (Platinum Efficiency), 2x 120mm fixed
fans,two 150mm SATA power cables with one 4-pin ATX power
header and 2 vertical SATA power headers, four 600mm SATA
cables , each cable has one vertical SATA header and one right
angle SATA header.
Note: This chassis is compatible with multiple server board skus.
As such the specific airduct and cables for that server board needs
to be ordered seperately. This chassis does not have any airduct.
AUPMGPURBR (920613) needs to be ordered to support add-in
GPGPU cards.
P4304XXMHEN
916336
00735858244657
5032037039222
1
A general purpose pedestal chassis targeted at small to medium
business supporting CEB and EEB form factor server boards with
3.5" Hot-Swap HDDs, 1x 550W Fixed Power Supplies and non-
Redundant Cooling
Includes: 4x 3.5" Hot-Swap Drive Carriers, 550W Fixed Power
Supply (Silver Efficiency), 2x 120mm fixed fans, one 480mm
mini-SAS cable with one vertical mini-SAS header and 4 vertical
SATA headers, one 100mm HotSwapBackPlane power cable with
one 4-pin ATX power header and one 2x2 header.
Note: This chassis is compatible with multiple server board skus.
As such the specific airduct and cables for that server board needs
to be ordered seperately. This chassis does not have any airduct.
AUPMGPURBR (920613) needs to be ordered to support add-in
GPGPU cards.