Spares, parts list, and configuration guide

12
P4308XXMFGR
916329
00735858244602
5032037039178
1
A general purpose pedestal chassis targeted at small to medium
business supporting CEB and EEB form factor server boards with
3.5" Fixed HDDs, 750W Cold-Redundant Power Supplies and non-
Redundant Cooling
Includes: 8x 3.5" Fixed Drive Carriers, 2x 750W Common
Redundant Power Supply (Platinum Efficiency), 2x 120mm fixed
fans, two 150mm SATA power cables with one 4-pin ATX power
header and 2 vertical SATA power headers, four 600mm SATA
cables , each cable has one vertical SATA header and one right
angle SATA header.
Note: This chassis is compatible with multiple server board skus.
As such the specific airduct and cables for that server board needs
to be ordered seperately. This chassis does not have any airduct.
AUPMGPURBR (920613) needs to be ordered to support add-in
GPGPU cards.
P4308XXMHDR
916331
00735858244619
5032037039185
1
A general purpose pedestal chassis targeted at small to medium
business supporting CEB and EEB form factor server boards with
3.5" Hot-Swap HDDs, 460W Cold-Redundant Power Supplies and
non-Redundant Cooling
Includes: 8x 3.5" Hot-Swap Drive Carriers, 2x 460W Common
Redundant Power Supply (Platinum Efficiency), 2x 120mm fixed
fans, one 480mm mini-SAS cable with one vertical mini-SAS
header and 4 vertical SATA headers, one 100mm
HotSwapBackPlane power cable with one 4-pin ATX power header
and one 2x2 header.
Note: This chassis is compatible with multiple server board skus.
As such the specific airduct and cables for that server board needs
to be ordered seperately. This chassis does not have any airduct.
AUPMGPURBR (920613) needs to be ordered to support add-in
GPGPU cards.
P4308XXMHDN
916332
00735858244626
5032037039192
1
A general purpose pedestal chassis targeted at small to medium
business supporting CEB and EEB form factor server boards with
3.5" Hot-Swap HDDs, single 460W Cold-Redundant Power
Supplies and non-Redundant Cooling
Includes: 8x 3.5" Hot-Swap Drive Carriers, 1x 460W Common
Redundant Power Supply (Platinum Efficiency), 2x 120mm fixed
fans, one 480mm mini-SAS cable with one vertical mini-SAS
header and 4 vertical SATA headers, one 100mm
HotSwapBackPlane power cable with one 4-pin ATX power header
and one 2x2 header.
Note: This chassis is compatible with multiple server board skus.
As such the specific airduct and cables for that server board needs
to be ordered seperately. This chassis does not have any airduct.
AUPMGPURBR (920613) needs to be ordered to support add-in
GPGPU cards.