User Guide

14 Intel

System Configuration Utility – User Guide

4.2.4 Save (/s)

syscfg /s [filename.SCF] {/f | /b | /f /b} or syscfg /s [filename.INI] {/f | /b | /f /b}

Filename

File name to be used for the syscfg

configuration file (.SCF or .INI) in the

current working directory. If no filename is

specified, the default file name syscfg.scf or

syscfg.ini is used based on the parameter

supplied explained in the example below.

The filename suffix must be .SCF or .INI, if

omitted; syscfg will add the .SCF suffix. The

filename should consist of only alphanumeric

characters.

Save the firmware settings. (See Appendix

B for a list of the settings that are saved.)

Save the BIOS settings. (See Appendix B for

a list of the settings that are saved.)

Save the BIOS and firmware settings to a SCF/INI file.

Example:

syscfg /s /f /b (default file name is syscfg.scf)

syscfg /s scf /f /b (default file name is syscfg.scf)

syscfg /s saved.scf /f

syscfg /s ini /f /b (default file name is syscfg.ini)

syscfg /s saved.ini /b

Notes:

 Save/Restore process following the INI file is not a means for exact cloning between

the servers; it is a means to clone a subset of BIOS/FW configurable settings and a

duplicating those settings in the deployed servers.

 Save and restore of Host IP, Subnet Mask, Default Gateway IP and Backup Gateway

IP is not supported on S1200BT and S1400/S1600/S2400/S2600/S4600 platform

series.