User Guide

Intel
®
System Configuration Utility – User Guide 35
4.4.10 LAN Enable (/le)
syscfg {/le | /lanenable} Channel_ID {dhcp | {static IP_Address Subnet_Mask}}
Channel_ID
BMC LAN Channel ID
static | dhcp
IP Address source
IP_Address
IP Address
Subnet_Mask
Subnet mask
Configures the LAN channel used by the BMC on the specified channel. See IPMI 2.0
Specification for more information.
.
Examples:
syscfg /le 1 dhcp
syscfg /le 1 static 10.30.240.21 255.255.255.0
4.4.11 LAN Failover Mode (/lfo)
syscfg {/lfo | /lanfailover} {enable | disable}
ENABLE | ENABLE Enable or Disable LAN Failover
On S1400/S1600/S2400/S2600/S4600 platform BMC FW provides a LAN failover capability
such that the failure of the system HW associated with one LAN link will result in traffic
being rerouted to an alternate link.
4.4.12 PEF Configure (/pefc)
syscfg {/pefc | /pefconfig} {enable | disable} {none | alert | pdown | reset | pcycle |
diagint}
enable | disable
Global PEF enable.
none | alert | pdown | reset | pcycle
| diagint
PEF Action. Enable multiple actions by using
a plus sign to concatenate the values. none
may not be combined with other options.
pdown means “power down,” pcycle means
“power cycle,” and diagint means
“diagnostic interrupt.”
Global enable of the Platform Event Filters used by the BMC.
See IPMI 2.0 Specification, Chapter 17, for more information on Platform Event Filtering.