Technical Product Specification

Intel
®
Server System R1000EP Product Family TPS Intel
®
Local Control Panel
Revision 2.0 Intel Order Number G67599-003 49
8.4.5 Power
Selection of Power item in the View menu displays the amount of AC power drawn by the
system in Watts.
Figure 52. LCP – Power Consumed by the System Currently
8.4.6 Last Post Code (Last PC)
Selection of Last PC item in the View menu displays the last BIOS POST code in hexadecimal.
Figure 53. LCP – Last BIOS Post Code
8.5 Config Menu
If the user selects Config item in the main menu, then the following options will be displayed
to configure:
Figure 54. LCP – Configure Menu Items
The following sub-sections will explain individual items of the configuration menu.
8.5.1 IP Version
If the user selects IP Version in the Config menu, the following options will be displayed. Based
the user’s selection, firmware will set the IP Version as either IPv4 or IPv6.
Figure 55. LCP – IP Version configuration screen
8.5.2 BMC IP
If the user selects BMC IP item, in the Config menu then the following options will
be displayed:
Figure 56. LCP – BMC IP Configuration Menu
Selection of the IP Source in the above menu, leads to the following screen. Based on the
user’s selection in the following menu, the firmware sets the BMC IP source as either DHCP
or Static.
^ | xx W
^ | XX (Last BIOS POST Code in Hex)
^ | IP Version | BMC IP | RMM4 IP |
Boot Device | Banner
^ | IPv4 | IPv6
^ | IP Source | IP Address | Subnet |
Gateway