Service Guide

Hardware Installation and Upgrades
48 Intel
®
Server System R1000EP Service Guide
5. Install the front USB connecter to the Intel
®
Local Control Panel bracket and secure the two
screws (see letter E).
6. Connect the xxxmm LCP cable to the LCP board and install the Intel
®
Local Control Panel
bracket into server chassis together with cables (see letter F).
7. Secure the two screws (see letter G).
8. Connect the Intel
®
Local Control Panel cable and the front USB cable to the server board (see
letter H).
Figure 77. Installing the Intel
®
Local Control Panel
Removing the Intel
®
Local Control Panel
1. Disconnect the Intel
®
Local Control Panel cable and the front USB cable from the server board
(see letter A).
2. Remove the two screws (see letter B).
3. Slide out the Intel
®
Local Control Panel from server chassis together with cables (see letter C).
4. Remove the two screws and slide out the front USB connecter from the bracket (see letter D).