Service Guide

Hardware Installation and Upgrades
Intel
®
Server System R1000EP Service Guide 47
Removing the Rack Handles
Remove the two screws holding the rack handle in place, and remove the rack handle from the
server system as shown.
Figure 75. Removing the Rack Handle
Installing and Removing the Intel
®
Local Control Panel
Installing the Intel
®
Local Control Panel
1. Disconnect the front video cable and the front USB cable from the server board (see letter A).
2. Remove the two screws (see letter B).
3. Slide out the bracket from server chassis together with cables (see letter C).
4. Remove the two screws and slide out the front USB connecter from the bracket (see letter D).
Figure 76. Removing the bracket