Service Guide

Hardware Installation and Upgrades
44 Intel
®
Server System R1000EP Service Guide
2. Gently press the metal clip as shown to release the battery (see letter A).
3. Remove the battery from the plastic socket (see letter B).
Figure 70. Replacing the Backup Battery
4. Dispose of the battery according to local ordinance.
5. Remove the new lithium battery from its package, and, being careful to observe the correct
polarity, insert it in the battery socket.
Note: You will need to run the BIOS Setup to restore the configuration settings to the BIOS variables.
Replacing a System Fan
1. Disconnect the fan cable (see letter A).
2. Pull system fan straight up to remove it from the fan holder.
Figure 71. Replacing a system fan
3. Replace the system fan.