Service Guide

Hardware Installation and Upgrades
38 Intel
®
Server System R1000EP Service Guide
6. Install the server system cover and connect the power cords. See your server system
documentation for instructions.
Installing and Removing the Intel
®
RAID Smart Battery
Installing the Intel
®
RAID Smart Battery
1. Connect the cable between the BBU and the RAID card. For details, see Intel
®
RAID Smart
Battery User’s Guide.
2. Locate the BBU bracket inside the chassis. Align the tabs on the plastic battery holder with
mounting holes on the BBU bracket (see letter A).
3. Slide the plastic battery holder toward the rear of the system until the tabs engage with the
mounting holes in the BBU bracket (see letter B).
Figure 60. Installing the Intel
®
RAID Smart Battery