Technical Product Specification

Intel
®
Local Control Panel Intel
®
Server System R1000EP Product Family TPS
50 Intel Order Number G67599-003 Revision 2.0
Figure 57. LCP – BMC IP Source Configuration Menu
If the user selects DHCP or the existing IP source is DHCP, then the other menu items, that is,
IP Address, Subnet and Gateway are not configurable. If the user selects Static or the existing
setting is static for IP source, then the user is allowed to change the other menu items and the
screen shots look as follows:
Figure 58. Screen shots for Configuring IP Address, Subnet Mask and Gateway
By default the cursor will be under the symbol, ^ and the IP address is displayed as
000.000.000.000. A right button will take the cursor to the first position (first 0) of the IP address.
When the cursor is under the second menu item, the functionality of Left, Right and Enter
buttons is different from the previous screens. The second token consists of twelve zeroes
separated by ‘.’ character in IP address format. The behaviors of these buttons are as follows
when the cursor is under this item.
1. Left and Right buttons inside the second menu item traverses among the 0 positions
within the same item.
2. If the cursor is under last position inside the second menu item, then a right button will
move the cursor to next item, that is, Set.
3. If the cursor is under first position inside the second menu item, then a left button moves
the cursor to the previous item, that is, ^.
4. First Enter button at any 0 (zero) position makes that position to be selected to
increment or decrement the value at that position. The values allowed are between and
including 0 and 9.
5. Any further Left or Right buttons will decrement or increment the value at that position.
6. Second Enter button at that position makes the cursor to be ready for moving left or right.
Any further Left or Right moves the cursor to previous or next position respectively.
7. So, the Enter button is used to select a position at the first time and to leave the position
at the second time.
The following state transition diagram explains the above steps pictorially, while setting an IP
address using the LCD device. After entering an IP address, the user has to select Set item to
set the entered IP address to the corresponding parameter (IP Address, Subnet Mask,
or Gateway).
^ | DHCP | Static
^ | IP: 000.000.000.000 | Set
^ | Subnet: 000.000.000.000 | Set
^ | Gateway: 000.000.000.000 | Set