Service Guide

Hardware Installation and Upgrades
40 Intel
®
Server System R1000EP Service Guide
Figure 63. Removing the power supply module
2. Do one of the following:
3. Insert the power supply module into the power supply cage and push all the way until it
clicks into place (see letter B).
Figure 64. Installing the power supply module
4. If no power supply is to be installed, install the filler panel into the power supply cage.
Figure 65. Installing the filler panel
To replace the power supply on a fixed power supply system, follow these steps:
1. Remove screws shown in letter A and pull the power supply upper as shown in letter B.