Technical Product Specification

BIOS Setup Interface Intel® Server Board S1600JP TPS
Setup
Item
Options
Help Text
Comments
0000:0000
0000:0000
0000:0000
0000:0000
is default
value for this field is acquired from the
BMC. The setting of IPv6 Source
determines whether this field is display-
only (when Dynamic or Auto) or can be
edited (when Static).
IPv6 Prefix
Length
Entry Field 0 –
128, 64 is
default
View/Edit IPv6 Prefix Length from zero
to 128 (default 64). Press <Enter> to
edit.
This specifies the IPv6 Prefix Length for
the Baseboard LAN. There is a separate
IPv6 Prefix Length field for the Intel
®
RMM4 LAN configuration.
This option is only visible when the IPv6
option is set to Enabled.
When IPv6 addressing is used, the initial
value for this field is acquired from the
BMC. The setting of IPv6 Source
determines whether this field is display-
only (when Dynamic or Auto) or can be
edited (when Static).
Intel
®
RMM4
Not Present
Intel
®
RMM4-
Lite
Intel
®
RMM4 +
DMN
None
Information only. Displays whether an
Intel
®
RMM4 component is currently
installed. This information may come
from querying the BMC.
Intel
®
RMM4-Lite is the Management
Module without the Dedicated Server
Management NIC Module. When this is
present, or if the Management Module is
Not Present at all, the fields for Intel
®
RMM4 LAN Configuration will not be
visible.
When an Intel
®
RMM4 + DMN is
installed, the options for Intel
®
RMM4
LAN Configuration will be visible. When
IPv6 is Disabled, the IPv4 configuration
fields will be visible and the IPv6
configuration fields will not be visible.
When IPv6 is Enabled, the IPv4 fields
will be grayed out and inactive, while the
IPv6 Configuration fields will be visible.
In either case, the Intel
®
RMM4 section
IP Source or IPv6 Source will determine
whether the IPv4 or IPv6 address fields
are display-only or can be edited.
132 Revision 1.9