Service Guide

Hardware Installations and Upgrades
44 Intel
®®
Server System R1000SP Service Guide
Figure 75. Installing the backplane
5. Connect cables to backplane; please refer to “Cable Routing”.
Installing and Removing the Rack Handles
Installing the Rack Handles
Align the rack handle with the two holes on the side of the server system and attach the rack handle
to the server system with two screws as shown.
Figure 76. Installing the Rack Handle
Removing the Rack Handles
Remove the two screws holding the rack handle in place, and remove the rack handle from the
server system as shown.
Figure 77. Removing the Rack Handle