Service Guide

Hardware Installations and Upgrades
Intel
®
Server System R1000SP Service Guide 37
Removing the Intel
®
RAID Smart Battery
1. Slide the plastic battery holder toward the front of the system to disengage it from the BBU
bracket (see letter A).
2. Lift the battery up to remove it from the server chassis (see letter B).
Figure 63. Removing the Intel
®
RAID Smart Battery
Replacing the Fixed Power Supply
Caution: Before replacing the power supply, you must first take the server out of service, turn off all
peripheral devices connected to the system, turn off the system by pressing the power button, and
unplug the AC power cord from the system or wall outlet.
The power supply can be replaced if it fails. To replace the power supply, follow these steps:
1. Unsecure the three screws from the rear side as shown (See Letter A), and remove the power
supply (See Letter B).
Figure 64. Removing the fixed power supply module