Service Guide

Hardware Installations and Upgrades
Intel
®
Server System R1000SP Service Guide 35
Figure 59. Installing the Intel
®
RMM4 Lite
Install the Intel
®
RMM4 NIC
1. Push out and remove the metal cover on the chassis where the NIC RJ-45 receptacle will align
(see letter A).
2. Position the module over the server board, fit the front of the module into the back panel slot,
and attach the module to the server board connector (see letter B).
3. Secure the module with the two screws as shown (see letter C).
Figure 60. Installing the Intel
®
RMM4 NIC
Removing the Intel
®
RMM4 Lite
Pull up the RMM4 Lite module to remove it from the mother board.
Removing the Intel
®
RMM4 NIC
1. Remove the two screws as shown (see letter A).