Service Guide

Hardware Installations and Upgrades
18 Intel
®®
Server System R1000SP Service Guide
Figure 23. Removing the Front Bezel
Installing the Front Bezel
Note: Before installing the bezel, you must install the rack handles.
1. Lock the right end of the front bezel to the rack handle (see letter A).
2. Push in the left side of the bezel until it clicks into place (see letter B).
3. Lock the bezel if needed.
Figure 24. Installing the Front Bezel
Removing and Installing the System Cover
Removing the System Cover
The server system must be operated with the system cover in place to ensure proper cooling. You will
need to remove the top cover to add or replace components inside of the server. Before removing the
top cover, power down the server and unplug all peripheral devices and the power cable(s).