Technical Product Specification

Intel
®
Local Control Panel Intel
®
Server System R1000SP Product Family TPS
56 Intel Order Number G64249-002 Revision 2.0
separated by ‘.’ character in IP address format. The behaviors of these buttons are as follows
when the cursor is under this item.
1. Left and Right buttons inside the second menu item traverses among the 0 positions
within the same item.
2. If the cursor is under last position inside the second menu item, then a right button will
move the cursor to next item, that is, Set.
3. If the cursor is under first position inside the second menu item, then a left button moves
the cursor to the previous item, that is, ^.
4. First Enter button at any 0 position makes that position to be selected to increment or
decrement the value at that position. The values allowed are between and including 0
and 9.
5. Any further Left or Right buttons will decrement or increment the value at that position.
6. Second Enter button at that position makes the cursor to be ready for moving left or
right. Any further Left or Right moves the cursor to previous or next position respectively.
7. So, the Enter button is used to select a position at the first time and to leave the position
at the second time.
The following state transition diagram explains the above steps pictorially, while setting an IP
address using the LCD device. After entering an IP address, the user has to select Set item to
set the entered IP address to the corresponding parameter (IP Address, Subnet Mask,
or Gateway).
Figure 62. State transition diagram for setting IP Address
9.5.3
RMM4 IP
Same screen shots and the same description as that of the previous section (“BMC IP”) are
applicable for “RMM4 IP” configuration menu also.
Left/
Right
Enter
Enter
Left
Left
Right
Right
Pos:
x
Pos:
x+1
Pos:
x-1
Increment/
Decrement