Technical Product Specification

Intel
®
Server System R1000SP Product Family TPS Intel
®
Local Control Panel
Revision 2.0 Intel Order Number G64249-002
55
9.5
Config Menu
If the user selects Config item in the main menu, then the following options will be displayed
to configure.
Figure 57. LCP – Configure Menu Items
The following sub-sections will explain individual items of the configuration menu.
9.5.1
IP Version
If the user selects IP Version in the Config menu, the following options will be displayed. Based
on the user’s selection, firmware will set the IP Version as either IPv4 or IPv6.
Figure 58. LCP – IP Version configuration screen
9.5.2
BMC IP
If the user selects BMC IP item, in the Config menu then the following options will
be displayed.
Figure 59. LCP – BMC IP Configuration Menu
Selection of the IP Source in the above menu, leads to the following screen. Based on the
user’s selection in the following menu, the firmware sets the BMC IP source as either DHCP
or Static.
Figure 60. LCP – BMC IP Source Configuration Menu
If the user selects DHCP or the existing IP source is DHCP, then the other menu items, that is,
IP Address, Subnet, and Gateway are not configurable. If the user selects “Static” or the existing
setting is static for IP source, then the user is allowed to change the other menu items and the
screen shots look as follows:
Figure 61. Screen shots for Configuring IP Address, Subnet Mask, and Gateway
By default the cursor will be under the symbol, ^ and the IP address is displayed as
000.000.000.000. A right button will take the cursor to the first position (first 0) of the IP address.
When the cursor is under the second menu item, the functionality of Left, Right, and Enter
buttons is different from the previous screens. The second token consists of twelve zeroes
^ | IP Version | BMC IP | RMM4 IP |
Boot Device | Banner
^ | IPv4 | IPv6
^ | IP Source | IP Address | Subnet |
Gateway
^ | DHCP | Static
^ | IP: 000.000.000.000 | Set
^ | Subnet: 000.000.000.000 | Set
^ | Gateway: 000.000.000.000 | Set