Technical Product Specification

Front Control Panel and I/O Panel Overview Intel
®
Server System R1000SP Product Family TPS
50 Intel Order Number G64249-002 Revision 2.0
Color
State
Criticality
Description
Amber
Solid on
Critical, non-
recoverable
Fatal alarm – system has failed or shutdown:
1. CPU CATERR signal asserted.
2. MSID mismatch detected (CATERR also asserts for this case).
3. CPU 1 is missing.
4. CPU ThermalTrip.
5. No power good – power fault.
6. DIMM failure when there is only 1 DIMM present and hence no
good memory present1.
7. Runtime memory uncorrectable error in non-redundant mode1.
8. DIMM Thermal Trip or equivalent.
9. SSB Thermal Trip or equivalent.
10. CPU ERR2 signal asserted.
11. BMC\Video memory test failed. (Chassis ID shows blue/solid-on
for this condition).
12. Both uBoot BMC FW images are bad. (Chassis ID shows
blue/solid-on for this condition).
13. 240VA fault.
Off
N/A
Not ready
AC power off
G – Power/Sleep Button – Toggles the system power on and off. This button also functions as
a sleep button if enabled by an ACPI compliant operating system. Pressing this button will send
a signal to the Integrated BMC, which will either power on or power off the system. The
integrated LED is a single color (Green) and is capable of supporting different indicator states
as defined in the following table.
Table 37. Power/Sleep LED Functional States
State
Power Mode
LED
Description
Power-off
Non-ACPI
Off
System power is off, and the BIOS has not initialized the chipset.
Power-on
Non-ACPI
On
System power is on
S5
ACPI
Off
Mechanical is off, and the operating system has not saved any context
to the hard disk.
S4
ACPI
Off
Mechanical is off. The operating system has saved context to the hard
disk.
S3-S1
ACPI
Slow blink
DC power is still on. The operating system has saved context and
gone into a level of low-power state.
S0
ACPI
Steady on
System and the operating system are up and running.
H- Drive Activity LED - The drive activity LED on the front panel indicates drive activity from
the on-board hard disk controllers. The server board also provides a header giving access to
this LED for add-in controllers.