Technical Product Specification

Functional Architecture Intel® Server Board S1400FP TPS
38 Intel order number G64246-003 Revision 2.0
3.4.1.1
Keyboard and Mouse Support
The server board does not support PS/2 interface keyboard and mouse. However, the system
BIOS recognizes the USB specification-compliant keyboard and mouse.
3.4.1.2
Wake-up Control
The super I/O contains functionality that allows various events to power on and power off the
system.
3.4.2
Graphics Controller and Video Support
The integrated graphics controller provides support for the following features as implemented on
the server board:
Integrated Graphics Core with 2D Hardware accelerator
DDR-3 memory interface supporting up to 128MB of memory, 16MB allocated to graphic
Supports display resolutions up to 1600 x 1200 16bpp @ 60Hz
High speed Integrated 24-bit RAMDAC
Single lane PCI Express* host interface running at Gen 1 speed
The integrated video controller supports all standard IBM VGA modes. The following table
shows the 2D modes supported for both CRT and LCD:
Table 8. Video Modes
2D Mode
2D Video Mode Support
8 bpp
16 bpp
24 bpp
32 bpp
640x480
X
X
X
X
800x600
X
X
X
X
1024x768
X
X
X
X
1152x864
X
X
X
X
1280x1024
X
X
X
X
1600x1200**
X
X
** Video resolutions at 1600x1200 and higher are only supported through the
external video connector located on the rear I/O section of the server board.
Utilizing the optional front panel video connector may result in lower video
resolutions.
The BIOS supports dual-video mode when an add-in video card is installed:
In the single mode (dual monitor video = disabled), the on-board video controller is
disabled when an add-in video card is detected.
In the dual mode (on-board video = enabled, dual monitor video = enabled), the on-
board video controller is enabled and is the primary video device. The add-in video card
is allocated resources and is considered the secondary video device. The BIOS Setup
utility provides options to configure the feature as follows: