Specification Update

Monthly Specification Update
7
11. IPMI Get Chassis Status command returns incorrect Chassis Identify
State.
Problem When a Get Chassis Status command is issued, after the Chassis Identify LED
has been forced on, the status of off (00b) is returned for Chassis Identify State
(response data byte 4 – bits [5:4]).
Implication Unable to correctly read when the Chassis Identify LED is on.
Status This issue is fixed in BMC release 1.10.r3560 and later version
Workaround None.
12. The BIOS and ME Firmware can't be updated successfully using Intel®
One Boot Flash Update Utility (OFU) under SuSE* Linux Enterprise
Server 11 (64-bit) with SP2
Problem OFU will fail to update BIOS & ME under SuSE* Linux Enterprise Server 11
(64-bit) with SP2 Operating System.
Implication If the system is running SuSE* Linux Enterprise Server 11 (64-bit) with SP2
Operating System, using OFU to update System Firmware Update
Package(SFUP) will fail.
Status This issue is fixed in OFU Version 11.0 Build 8.
Workaround Update System Firmware Update Package(SFUP) from EFI environment using
iFlash32, FWPIAUpdate and FRUSDR Utility.
13. BMC continuously sends HDD assert/de-assert event during HDD RAID
rebuild under ESRT2 mode of the SCU controller
Problem HDD fault will keep asserting and de-asserting frequent during RAID rebuild
under ESRT2.
Implication During HDD ESRT2 RAID rebuild, there's flood HDD fault assert/deassert (SAS
RAID) or Rebuild/remap (SATA RAID) logs into SEL.
Status This issue is fixed in ESRT2 driver release 15.00.0528.2012
Workaround None.