Service Guide

Server Utilities
Intel
®
Server System R1000RP Service Guide 85
Enhanced provides Native SATA support using native SATA drivers included with the vast
majority of current OSes.
AHCI enables the Advanced Host Controller Interface, which provides Enhanced SATA
functionality plus possible additional functionality (Native Command Queuing, Hot Plug,
Staggered Spin Up). It uses AHCI drivers available for the majority of current OSes.
RAID Mode provides host based RAID support on the onboard SATA ports. RAID levels
supported and required drivers depend on the RAID stack selected
Back to [Mass Storage Controller Configuration Screen] — Back to [Screen Map]
2. AHCI Capable RAID Options
Option Values: Intel(R) ESRT2 (LSI*)
Intel(R) RSTe
Help Text:
- Intel
®
ESRT2 (Powered By LSI*): Supports RAID 0/1/10 and optional RAID 5 with Intel
®
RAID C600 Upgrade Keys. Uses Intel
®
ESRT2 drivers (based on LSI* MegaSR).
- Intel
®
RSTe: Provides pass-through drive support. Also provides host based RAID 0/1/10/5
support. Uses Intel
®
RSTe iastor drivers.
Comments: This option only appears when the SATA Controller is enabled, and
RAID Mode has been selected as the operational SATA Mode. This setting selects the RAID
stack to be used for SATA RAID with the onboard AHCI SATA controller.
If a RAID Volume has not previously been created that is compatible with the RAID stack
selected, it will be necessary to Save and Exit and reboot in order to create a RAID Volume.
Note: This option does not appear on all boards.
Back to [Mass Storage Controller Configuration Screen] — Back to [Screen Map]
3. Intel(R) Storage Module
Option Values: None
<Name of Storage Module detected>
Names of Storage Modules supported at this time are:
Intel
®
Integrated RAID Module
Intel
®
Integrated RAID Module RMS25PB040
Intel
®
Integrated RAID Module RMT3PB080
Intel
®
Integrated RAID Module RMS25CB080
Intel
®
Integrated RAID Module RMS25CB040
Intel
®
Integrated RAID Module RMT3CB080
Intel
®
Integrated RAID Module RMS25JB080
Intel
®
Integrated RAID Module RMS25JB040
Intel
®
Integrated RAID Module RMS25KB080
Intel
®
Integrated RAID Module RMS25KB040
Help Text: <None>
Comments: Information only. If no Intel
®
Storage Module is detected, then None is
displayed. This shows the customer the product name of the module installed, which helps in
identifying drivers, support, documentation, etc.
Back to [Mass Storage Controller Configuration Screen] — Back to [Screen Map]