Service Guide

Hardware Installations and Upgrades
Intel
®
Server System R1000RP Service Guide 39
For installing 2.5" Hard Disk Drive as option:
a) Break off the tab on the HDD interface bracket (see letter d1).
b) Install the HDD interface bracket from top.
c) Secure the bracket with three screws as shown (see letter d2).
d) Slide the 2.5" HDD into the bracket to align the screw holes with the right and left rail (see
letter d3).
e) Secure the hard disk drive using the four screws for 2.5" HDD (see letter d4).
Figure 42. Installing Hard Disk Drive – Installing 2.5" HDD
4. With the lever open, insert the hard disk drive assembly into the chassis (see letter E). Push in
the lever to lock it in place (see letter F).
Figure 43. Installing Hard Disk Drive – Inserting 3.5" HDD Assembly